Batteries & Chargers Discuss Li-P, Li-Ion, NiMh, Nicad battery technology and the chargers that juice 'em up!

Pairing 2 Lipo Queastion

Old 02-11-2018, 10:30 AM
  #1  
Emilinoz
Member
Thread Starter
 
Join Date: Jan 2018
Posts: 22
Default Pairing 2 Lipo Queastion

I have a queastion; If you were to take 2 Lipo Batterys say 3cell each @ 2200mah each,but one is 20c Rated and the other 30c Rated and joined them together- at wich C rateing would the motor draw? 20c Constant or 30c Constant; Dont know if ime right or not but i would say 20c- My reason is because its rated at 20c and you wouldnt be able to draw 30c from a 20c rated battery? Am i right or way off and wat would be the affect if you went ahead with this set-up,Dont get me wrong i wouldnt attempt this at all but ive always wondered wat the outcome would be.Emil.
Emilinoz is offline  
Old 02-11-2018, 11:21 AM
  #2  
JetPlaneFlyer
Super Contributor
 
JetPlaneFlyer's Avatar
 
Join Date: Mar 2009
Location: Aberdeen, Scotland
Posts: 6,120
Default

Ideally if pairing two batteries (series or parallel) you would use batteries of the same C rating. Having said that for moderate or low demand applications it will be ok to use different C ratings. You take the rating of the lowest battery, so as you suggest in your example that would be 20C.
JetPlaneFlyer is offline  
Old 02-11-2018, 12:58 PM
  #3  
solentlife
Super Contributor
 
solentlife's Avatar
 
Join Date: Oct 2010
Location: Ex UK Brit now in Latvia west coast - Ventspils
Posts: 11,924
Default

It depends on whether series or parallel ...

In series then you would have to regard the lower C rating as your marker. Not advised to have different rated packs - but it happens ! Series adds the Voltage but leaves mAh same.

In parallel - then technically you can push harder and have a composite C rating - BUT it is not advised and could lead to problems. The theory being that the load has been divided because volts remain same but mAh increased.

In practical terms : It is common for twin packs to be used - but it is advised to use same size / C rating and even brand - to ensure balanced use. It is also advised that both should be at same state of charge when coupled ... to avoid surge from higher to lower ...

Nigel
solentlife is offline  
Old 02-11-2018, 09:59 PM
  #4  
Panther
Super Contributor
 
Panther's Avatar
 
Join Date: Oct 2012
Location: South East Queensland, Australia
Posts: 1,431
Default

Emil it wouldn;t matter unless your set-up required more than 20C, not forgetting that your 20C battery may not be capable of a true 20C anyway. However if your plane only had a current requirement of 10C - 15C it wouldn't matter at all. It would do no harm to either battery.
Panther is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
SimonXi
Power Systems
0
08-17-2011 12:02 PM
SimonXi
Batteries & Chargers
0
08-12-2011 06:08 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Quick Reply: Pairing 2 Lipo Queastion


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.04557 seconds with 13 queries